Wide-Crown Staplers
SPS
PW / PW2"
MW
 
SPS Roofing Stapler:
Designed with a special wear plate, hardened safety mechanism and shingle-depth gauge, the SPS drives staples from 7/8" to 1-1/2" (20 to 38mm). It is ideal for composite shingle roofing, reroofing applications and roofing felt installation. The SPS is also excellent for lath wire and insulation attachment, furniture and cabinet assembly, and carton-to-skid attachment in packaging.
SPS Tool Specifications:
Tool Weight: 5.3 lbs. (2.4 kg)
Height: 9-7/8" (251 mm)
Length: 13-1/2" (343 mm)
Tool Width (Main Body): 3-1/32" (78 mm)
Staple Capacity: 140+
Mode of Operation: Available with either Restrictive Trigger or Dual Action activating mechanisms
Operating Pressure: 70-120 p.s.i.g.
To top of page
Fastener Specifications:
The SPS Roofing Stapler drives the following P Series Staples:
Leg Length: 7/8" to 1-1/2" (20 to 38mm)
Crown: 1" (25.4mm)
Width: .062" (1.6mm)
Thickness: .055" (1.4mm)
Gauge: 16
 
PW Roofer / PW Industrial / PW-2" Wide-Crown Staplers:
A longtime favorite with the pros, the PW Roofer is ideal for asphalt and fiberglass shingle roofing applications. The PW Roofer drives staples from 1/2" to 1-1/4",(13 to 32mm). The roofer model comes equipped with a special wear plate, a hardened safety mechanism, and a handy shingle gauge to ensure consistent spacing from course-to-course. (specify #130003N)
The PW Industrial also drives from 1/2" to 1-1/4" and is ideal for attaching insulation, lathing, belt lines, furniture/cabinet frame butt-jointing and carton-to-skid. (specify #130002N)
The PW-2" is primarily used in wire lath applications, insulative sheathing, styro, ridge vents, and industrial applications where longer leg staples are desired. (specify #130063N)
PW/PW-2" Tool Specifications:
Tool Weight: 4.9 lbs. (2.2 kg)
Height: 8-1/16" (204mm)
Length: 12-1/2" (317mm)
Lip Length: 1/4" (13mm)
Staple Capacity: 140+
Mode of Operation: Tool is available with either Restrictive Trigger or Dual Action activating mechanism
Operating Pressure: 80-100 p.s.i.g.
To top page
Fastener Specifications:
The PW/PW-2" Roofer drives the following P Series Staples:
Leg Length: PW drives - 1/2" to 1-1/4" (13 to 32 mm), PW-2" drives - 1" to 2" (25 to 50mm)
Crown: 1" (25 mm)
Width: .062" (1.6mm)
Thickness: .055" (1.4 mm)
Gauge: 16
 
MW Wide-Crown Stapler:
Engineered for asphalt and fiberglass shingle roofing and lathing applications, the MW drives staples from 3/4" to 1-1/2". (20 to 38mm) It too comes with a special wearplate and hardened safety.
 
MW Tool Specifications:
Tool Weight: 7.4 lbs (3.3 kg)
Height: 9-3/4" (248mm)
Length: 12-9/16" (318mm)
Stapler Capacity: 140+
Mode of Operation: Tool is available with either Restrictive Trigger or Dual Action activating mechanism
Operating Pressure: 80-100 p.s.i.g.
Fastener Specifications:
The MW Wide-Crown Stapler uses the following P Series Staples:
Leg Length: 3/4" to 1-1/2". (20 to 38mm)
Crown: 1" (25.4mm)
Width: .062" (1.6mm)
Thickness: .055" (1.4mm)
Gauge: 16
 
To top page

On Line Catalog | Fasteners |Parts Kits ||Safety First | Warranty |MasterFit | AccuSet | Fiac Compressors |About Senco| Map to Senco | |E-mail Links to SENCO |

© 2000, Senco Fastening Systems (Ireland) Ltd.

Senco Fastening Systems (Ireland) Ltd
Unit S2, Ballymount Drive Industrial Estate,
Walkinstown
Dublin 12
Ireland

Tel: (01) 456 7773
Fax: (01) 450 0453
E-mail: info@senco.ie