Framing & Sheathing Nailers
FramePro 600
FramePro 650
SN60 / SN65 / SN65C
SN60MC
SN70

 

Depth-of-drive control and EZ Clear nail jam feature

FramePro 600

With the highest power-to-weight ratio in its class, this compact model is easy to handle and easy on the arm. Its short, 30 degree in-line magazine provides excellent maneuverability and line of sight. The FramePro's aggressive, sawtooth toenail safety grips studs effectively when driving at an angle.

FramePro 600 Specifications:

Tool Weight: 8.0 lbs. (3.6 kg)
Height: 13-1/4" (336mm)
Length: 15" (381mm)
Nail Capacity: 56-80, depending on gauge
Mode of Operation: Available with either Restrictive Trigger or Dual Action activating mechanisms
Reg. Operating Pressure: 70-120 p.s.i.g. (4.8-8.3 Bar)

The FramePro 600 is the contractors tool of choice and can handle most of the common (.131" diameter nail) framing & sheathing applications. The 600 even works well with most wood to green concrete applications.

The FramePro 650, with 10 percent more power than the 600 model, should be used for laminated woods, frozen woods, trusses or wood-to-concrete block, or where .148" diameter nails are used for framing.

Fastener Specifications:

The FramePro 600 drives the following types of nails:

  • 2" through 3-1/2" (50 - 90mm) smooth-shank nails (Sencote® or plain)
  • 2" to 3" (50 - 75mm) ring-shank nails
  • 3" (75mm) screw-shank and clipped "D" head nails
Shank diameters include .113", .120", .131" and .148".
Ring-Shank Nails
Screw-Shank Nails
Flat Head Strip Nails
 

Depth-of-drive control and EZ Clear nail jam feature

FramePro 650

Offering 10 percent more power than the FramePro 600, the FramePro 650 can be used to drive trusses or wood-to-concrete block.

FramePro 650 Specifications:

Tool Weight: 8.4 lbs. (3.8 kg)
Height: 14-1/4" (356mm)
Length: 15" (381mm)
Nail Capacity: 56 - 80, depending on gauge
Mode of Operation: Available with either Restrictive Trigger or Dual Action activating mechanisms
Reg. Operating Pressure: 70 - 120 p.s.i.g. (4.8 - 8.3 Bar)

Fastener Specifications:

The FramePro 650 drives the following types of nails:
  • 2" through 3-1/2" (50 - 90mm) smooth-shank nails (Sencote® or plain)
  • 2" to 3" (50 - 75mm) ring-shank nails
  • 3" (75mm) screw-shank and clipped "D" head nails
Shank diameters include .113", .120", .131" and .148".
 
Ring-Shank Nails
Screw-Shank Nails
Flat Head Strip Nails
 

Adjustable depth-of-drive

SN60 Nailer
Shipped complete with a comfort-grip handle, the SN60 drives a variety of full round-head nails. Its excellent balance, power-to-weight ratio (7.7 lbs.)(3.5kg) and adjustable depth-of-drive control deliver just the right countersink.
SN60 Nailer Specifications:
Tool Weight: 7.7 lbs. (3.5 kg)
Height: 13-1/2" (safety extended) (343 mm)
Length: 19-3/4" (502 mm)
Lip Length: 3/8" (10 mm)
Magazine Capacity: 60
Mode of Operation: Available with either Restrictive Trigger or Dual Action activating mechanisms
Reg. Operating Pressure: 70-120 p.s.i.g.
Hose Fitting: 3/8" (10 mm)
Fastener Specifications:
The SN60 drives true round-head framing nails, ranging from 2" to 3-1/2"* in length (50 to 90 mm)
* 3-1/2" (90mm) nail for soft wood applications only
Ring-Shank Nails
Screw-Shank Nails
Flat Head Strip Nails
 
SN65/65C Nailer Specifications:
Tool Weight: 8.1 lbs. (3.7 kg)
Height: 13-5/8" (359mm)
Length: 19-3/4" (502mm)
Lip Length: 3/8" (10mm)
Magazine Capacity: 60
Operating Pressure: 70-120 p.s.i.g. (4.8-8.3 bar)
Mode of Operation: Available with either Restrictive Trigger or Dual Action activating mechanisms
To top of page
SN65/65C Nailer
Along with all the comfort, balance and drive attributes of the SN60, the SN65 and SN65C have increased power-to-weight ratios (8.1 lbs)(3.7kg) and 15 percent more power than the SN60.
Fastener Specifications:
The SN65 drives true round-head framing nails, ranging from 2" to 3-1/2" in length (50 to 90mm). The SN65C drives 2-1/2" to 3-1/2" (65 to 90mm) common nails.
Ring-Shank Nails
Screw-Shank Nails
Flat Head Strip Nails
 

 

SN60MC Metal Connector Nailer Specifications:

Tool Weight: 7.7 lbs. (3.5 kg)
Height: 12-13/16" (325mm)
Length: 14" (365mm)
Width: 4-5/8" (109mm)
Magazine Capacity: 30
Operating Pressure: 80-120 p.s.i.g. (5.5-8.3 bar)
Mode of Operation: Available only with Restrictive Trigger activating mechanisms
Hose Fitting: 1/4" (6mm)
To top of page

SN60MC
Designed for earthquake & high-wind areas where codes call for metal connecting plates. Accurately fasten the full range of metal connectors with unique hole locating safety design.
Fastener Specifications:
The SN60MC drives .131", .148" & .162 full round-head framing nails in lengths of 1-1/2" and 2-1/2".
 
   
SN70 Nailer:
Designed for a wide variety of on-site and in-plant construction applications, the SN70 drives hardened steel nails for wood-to-concrete block or poured concrete applications. It is also designed for crate and box assembly, pallet making, furniture frame assembly and cabinet work.
SN70 Nailer Specifications:
Tool Weight: 9.7 lbs. (4.4 kg)
Height: 14-11/16" (373 mm)
Length: 15-7/8" (403 mm)
Lip Length: 1/2" (10 mm)
Magazine Capacity: 60 to 70, depending on shank size
Reg. Operating Pressure: 65-120 p.s.i.g.
To top of page
Fastener Specifications:
The SN70 drives the following types of nails:
2" to 3-1/2" (50-90mm) smooth-shank, flat round-head nails (Sencote® or plain)
2" to 3" (50-75mm) screw-shank nails
Shank diameters vary from .113" to .131"
Most nails available with optional electro-galvanization, Weatherex II, or hot dip galvanized plating for corrosion resistance
A modified SN70 drives the 20d, KC31 smooth-shank 4" (100mm) nail
Ring-Shank Nails
Screw-Shank Nails
Flat Head Strip Nails
 
To top of page
 
On Line Catalog | Fasteners |Parts Kits ||Safety First | Warranty |MasterFit | AccuSet | Fiac Compressors |About Senco| Map to Senco | |E-mail Links to SENCO |

© 2000, Senco Fastening Systems (Ireland) Ltd.

Senco Fastening Systems (Ireland) Ltd
Unit S2, Ballymount Drive Industrial Estate,
Walkinstown
Dublin 12
Ireland

Tel: (01) 456 7773
Fax: (01) 450 0453
E-mail: info@senco.ie