Straight -Drive Jaws
- Adjustable depth-of-drive
-
- SCN40R Straight-Drive Roofing Coil Nailer:
- The only coil nailer on the market that can consistently drive nails to shingle manufacturers' specifications, the SCN40R excels at asphalt and fiberglass shingle nailing for both new roofs and reroofing jobs. It is also uniquely designed for attaching tar paper, metal drip edges and insulation boards. With the addition of a special attachment, the SCN40R can also nail vinyl and aluminum siding. It never needs lubricating.
- SCN40R Straight-Drive Roofing Coil Nailer:
- SCN40R Tool
Specifications:
- Weight: 5.2 lbs. (2.3 kg.)
Height: 10-3/8" (264 mm)
Length: 9-3/4" (248 mm)
Nail Capacity: 120
Nail Collation: Conical wound, angled coil wire
Operating Pressure: 70-120 p.s.i.g. (4.8- 8.3 bar)
Mode of Operation: Tool is available with either Restrictive Trigger or Dual Action activating mechanisms
Hose Fitting: 1/4 NPT- To top of page
- Weight: 5.2 lbs. (2.3 kg.)
- Fastener Specifications:
- Leg Length: 3/4"(19mm), 7/8"(22mm), 1"(25mm), 1-1/4"(32mm), 1-1/2"(38mm)
Shank: .120
Product Code: HJ11, HJ12, HJ13, HJ15, HJ17
Available in: Galvanized coated Roofing Nails: Available in 3.2 or 7.2 M cartons - Leg Length: 3/4"(19mm), 7/8"(22mm), 1"(25mm), 1-1/4"(32mm), 1-1/2"(38mm)
- SCN45 Tool
Specifications:
- Weight: 4.4 lbs. (2.0 kg.)
Height: 10-5/8" (270 mm)
Length: 11" (280 mm)- Width: Main Body 3 1/3"(84 mm); Canister 5"9127 mm)
Nail Capacity: 375
Nail Collation: Conical wound, angled coil wire Speed: (Maximum Cycle rate per Second) 10
Operating Pressure: 70-100 p.s.i.g.
Mode of Operation: Tool is available with either Restrictive Trigger or Dual Action activating mechanisms - Weight: 4.4 lbs. (2.0 kg.)
Applications: For packaging, including boxes, crates and pallets, sheathing, subfloor, decking, fencing and furniture frames.
Fastener Specification: Drives three smooth-shank and three ring-shank, flat full round-head coated hails.
The SCN45 is one of the lightest coil nailers on the market @ 4.4 lbs. The high load capacity (375 nails) minimizes production interruption. Reloads in seconds with easy load swing out magazine canister top. Drive a broader range of fasteners with an adjustable-height tray which also allows quick change of nail lengths from 1 1/4" to 2". Trigger lock to prevent accidental firing when tool is not in use. Exhaust rotates 360 degrees to exhaust away from workers without the use of tools.
- Smooth Shank
inches 1 1/2" 1 3/4" 2" Millimeters 38 45 50 Shank Diameter .082 .082 .082 Part # SC17APB SC19ABP SC21APB Nails/Carton 12,000 12,000 9,000 Coils/Carton 32 32 32 - Ring Shank
inches 1 1/4" 1 1/2" 1 3/4" Millimeters 32 38 45 Shank Diameter .082 .082 .082 Part # SE15APB SE17ABP SE19APB Nails/Carton 15,000 12,000 12,000 Coils/Carton 40 32 32
- Adjustable depth-of-drive
-
- SCN55S Coil Nailer:
- Complete with a comfort-grip handle and a multi-directional exhaust, this all-purpose nailer drives a wide variety of full round-head nails for siding, sheathing, sub-floors, fencing, wood shingles and pallets. With its convenient, adjustable depth-of-drive, there are no tools required to alter nail depth.
- SCN55S Tool
Specifications:
- Weight: 5.8 lbs. (2.6 kg.)
Height: 12- 7/8" (327 mm)
Length: 10-1/2" (267 mm)
Width: 5-1/4" (133 mm)
Nail Capacity: 200-350
Nail Collation: Wire weld
Operating Pressure: 70-100 psig (4.8-6.9 bar)
Mode of Operation: Available with either Restrictive Trigger or Dual Action activating mechanisms
Hose Fitting: 1/4"NPT- To top of page
- Weight: 5.8 lbs. (2.6 kg.)
- Fastener Specifications:
- The SCN55S drives Smooth Shank nails 2" to 2-1/4"(50 to 57mm) . Ring Shank nails 1-7/8" to 2-1/4"(48 to 57mm)
Shank: .092
Product Code: Smooth:ED21, ED23,- Ring: EL20, EL23
Available in: Regular Galv., Weatherex II Galv., Brt. Basic.
Other size nails available by special order. - The SCN55S drives Smooth Shank nails 2" to 2-1/4"(50 to 57mm) . Ring Shank nails 1-7/8" to 2-1/4"(48 to 57mm)
- Adjustable depth-of-drive
-
- SCN60 Coil Nailer
- Designed with exceptional balance and power-to-weight ratio, the SCN60 drives a variety of full round-head nails up to 2-1/2" (65mm). Its adjustable depth-of-drive control is excellent for determining just the right countersink for framing, sheathing, decking, subfloors, wood storage sheds, pallets, crates and boxes.
- SCN60 Tool
Specifications:
- Tool Weight: 7.5 lbs. (3.4 kg)
Height: 12-3/8" (314mm)
Length: 12-7/8" (327mm)
Width (tool): 4-3/8" (111mm)
Width (canister): 5-3/8" (137mm)
Nail Capacity: 250-275
Collation: Flat, angled coil wire
Operating Pressure: 70-120 p.s.i.g. (4.8-8.3 bar)
Mode of Operation: Available with either Restrictive Trigger or Dual Action activating mechanisms
Hose Fitting: 3/8" NPT- To top of Coil Nail Page
- Tool Weight: 7.5 lbs. (3.4 kg)
- Fastener Specifications:
- The SCN60 Coil Nailer drives the following types of nails: 2" to 2-1/2" (50 to 65mm) smooth-shank, flat round-head nails (Sencote® or plain), 2-1/4" to 2-1/2" (57 to 65mm) ring-shank nails
- The SCN60 Coil Nailer drives the following types of nails: 2" to 2-1/2" (50 to 65mm) smooth-shank, flat round-head nails (Sencote® or plain), 2-1/4" to 2-1/2" (57 to 65mm) ring-shank nails
adjustable depth-of-drive
-
- SCN65 Coil Nailer:
- Along with all the comfort, balance and drive attributes of the SCN60, the SCN65 has more power than the SCN60, increased power-to-weight ratio and can drive a variety of full round-head nails up to 3-1/2"(90mm). It is ideal for framing, sheathing, decking, subfloors, exterior decks, pallets, crates and boxes.
- SCN65 Tool
Specifications:
- Tool Weight: 8.0 lbs. (3.6 kg)
Height: 14-1/8" (359mm)
Length: 12-7/8" (327mm)
Width (tool): 4-3/8" (111mm)
Width (canister): 5-3/8" (137mm)
Nail Capacity: 225-275 Collation: Flat, angled coil wire- Operating Pressure: 70-120 p.s.i.g. (4.8-8.3 bar)
Mode of Operation: Tools are available with either Restrictive Trigger or Dual Action activating mechanisms
Hose Fitting: 3/8" NPT- To top of page
- Tool Weight: 8.0 lbs. (3.6 kg)
- Fastener Specifications:
- The SCN65 Coil Nailer drives the following types of nails:
2" to 3-1/2"(50 to 90mm) smooth-shank, flat round-head nails (Sencote® or plain)
2" to 3" (50 to 74mm) ring-shank nails
2" to 3" (50 to 74mm) screw-shank nails - The SCN65 Coil Nailer drives the following types of nails:
- SCN200 (50) Tool
Specifications:
- Tool Weight: 5.1 lbs. (2.3kg)
Height: 10-1/4" (260mm)
Length: 9-1/2" (241mm)
Nail Capacity: 375
Mode of Operation: Tools are available with either Restrictive Trigger or Dual Action activating mechanisms
Hose Fitting: 3/8" NPT- To top of page
- Tool Weight: 5.1 lbs. (2.3kg)
- Fastener Specifications:
- The SCN200 Coil Nailer drives the following types of nails:
- 1-1/4" to 1-3/4" (32 to 44mm) ring-shank nails
- 1-1/2" to 2" (38 to 50mm) smooth-shank nails
- The SCN200 Coil Nailer drives the following types of nails:
-
- On Line Catalog | Fasteners |Parts Kits ||Safety First | Warranty |MasterFit | AccuSet | Fiac Compressors |About Senco| Map to Senco | |E-mail Links to SENCO |
© 2000, Senco Fastening Systems (Ireland) Ltd.
Senco Fastening Systems (Ireland) Ltd
Unit S2, Ballymount Drive Industrial Estate,
Walkinstown
Dublin 12
Ireland
Tel: (01) 456 7773
Fax: (01) 450 0453
E-mail: info@senco.ie